Sump Pump Installation Edmonton

Yes, we do. Considering that the safety of your home’s dryness is in the hands of a tiny pump, you’ll want to make sure you avoid a sump pump failure. Don’t worry; we offer sump pump replacement and sump pump repair services for this very reason.

As for sump pump installation, Edmonton homeowners who don’t yet have a pump installed in their newly built abode, or those who bought a house without one, are probably curious about what’s entailed in our sump pump services.

Ultimately, that decision is yours. If you ask someone who just experienced a sump pump failure, their answer will almost always be YES!

Remember that sump pumps are mechanical devices that will eventually fail. When your pump fails, and there’s no way to pump out that groundwater, what is your plan? With a battery backup sump pump, when the primary pump fails, the backup pump will take over and alert you that something is wrong. The battery backup pump will also have your back when the power goes out; talk about peace of mind!

Unfortunately, there’s no easy answer here; it largely depends on the soil conditions beneath your home. Putting a sump pit in a basement without weeping tile is largely a matter of guesswork. The natural thought is to put it where the water pools, but that is often wrong. It is very difficult to determine where the water is flowing in from, if not all over.

Ultimately, if your home is sitting on tightly compacted clay beneath the basement, water won’t flow through it well enough to make a sump pit work properly as the low spot for collecting water. However, if the earth under your basement is sandy or gravel, it will often work well, as groundwater will naturally migrate to the open pit for pumping.

Generally, the better option is to install weeping tile around the outer perimeter of the basement footing. This is the tried-and-true method for dealing with groundwater.

There are five main factors that influence the cost of a sump pump installation in Edmonton. These include:

1. The type of sump pump
2. Basement material
3. Drainage
4. Permits
5. Licensed and skilled plumber

Although you might be tempted to try to cut costs by installing your sump pump yourself, it's recommended that you let a licensed plumber handle the installation. This saves you money in the long run because an improperly installed sump pump will only cause more damage that will need to be repaired.

An Edmonton sump pump installation service can take approximately 1.5 hours to complete, provided you're replacing an existing sump pump rather than having one installed from scratch. However, that time can vary (even reaching 3 to 4 hours) depending on how complex the job is and your home's requirements.

At Mr. Rooter Plumbing, our team of expert plumbers can provide a more precise timeline for your sump pump installation once they've assessed your home's needs and the job's complexity.

Yes, we absolutely can! Although it's much easier (and more cost-effective) to install a sump pump and associated drainage system in a home during construction or a major basement renovation, it's definitely recommended that you have one installed within your finished basement if you don't already have one. That's because they're part of a crucial water management system that protects your home from potentially costly repairs.

If you have a sump pit, ideally you should have two sump pumps inside it. One is the primary pump, while the other is a backup pump. There's a good reason to install a backup pump during a sump pump installation.

The main reason you need two pumps is to ensure a fail-safe is in place should the first one fail or your home's power go out. A battery backup sump pump is a great option for when the power goes out. However, if your home has a backup generator, you can replace the battery-operated pump with a secondary AC pump. The primary reason that you need a secondary pump is in case your power or the first pump fails; after all, these pumps don't last forever.

Your sump pump will usually last between 3 and 10 years. The actual duration it lasts will vary depending on the quality of the pump and the conditions it is subjected to. Regular maintenance will help extend the life of your pump, including visual checks by you and thorough inspections by a professional plumber.

If your sump pump has been properly installed and you've taken the initiative to ensure it's maintained, you should expect it to last around 10 years. However, that can vary depending on the quality of the sump pump and how frequently it's used. Proper maintenance is key; otherwise, you might notice that it breaks down and stops working long before it needs replacement.

You can bet it does. Installing a sump pump or taking other steps to improve your home's safety will increase its value. Adding this asset to your home’s list of features immediately makes it more attractive to buyers as it’s one less thing they need to do themselves.

If you have a battery backup system, you should have your sump pump inspected by a professional at least once per year. Your expert plumber will inspect all the working parts of your pump, including the pit, the hose and the drainage line. If repairs are needed, we’ll inform you of the necessary procedures before we begin.

When having a professional sump pump installation, Edmonton locals can expect their sump pump to be placed at least 3 feet deep in the pit. Additionally, it's important that the rim of the sump pump's basin is flush with the basement's floor. However, homes with walk-out basements generally have a much deeper pit.

You want a designated area for your sump pump to discharge water. This could be a dry well, a creek, a pond, or even a neighbourhood drain. However, you want to ensure that the water won't return to your home. Thus, it's recommended that you direct it at least 10 to 20 feet away from your home's foundation. Depending on building codes, there might be restrictions on where your sump pump can drain, but an experienced plumber will be well-versed in local codes and restrictions.

Sump pump installation projects are generally simple. However, there’s a bit more to sump installation than just the installation part. First, during your first appointment with Mr. Rooter Plumbing, a member of our knowledgeable team will cover all the bases before scheduling a date and time that works for your installation. A few things we’ll talk through with you include sump pump types, backup power preference, and switch systems. Think you might need a sump pump installation? Edmonton homeowners who would like to know more about the service should call our dedicated customer care team.

Even if a home doesn’t have a sump pump, most homes will have weeping tile, also known as perimeter drains. In this case, the weeping tile is buried along the outside perimeter of your home and then usually connects to the sewer to drain the water away. If your home has this, why would you need a sump pump? Old systems were set up to drain this water into the sewer, but those systems have flaws of their own, and generally are no longer working as originally designed. A sump pump will support your weeping tile and prevent basement flooding and foundation damage.

Edmonton homeowners can reap many advantages when installing a new sump pump. Some of these benefits include:

• Prevents basement flooding
• Control moisture levels and mould growth
• Boosted property value
• Saves money on costly repairs down the road

Edmonton homeowners can have peace of mind that we guarantee our parts and labor for up to a year when working on residential properties. With our Neighbourly Done Right Promise®, we guarantee to provide quality workmanship, high-grade plumbing tools, and long-lasting solutions. For specific sump pump manufacturers, warranties will vary.

The cost to install a completely new sump pump system in Edmonton, including the pit, pump, piping, and professional installation, can range from $1,000 to $3,500. This price can fluctuate based on factors such as the depth of your basement, local groundwater conditions, and the type of pump you choose.

Generally, if you are replacing your sump pump with an identical model in the same location, a permit is not required, as it's considered maintenance. However, if you're upgrading to a larger capacity pump, relocating it, or installing a completely new system, you will need to obtain a plumbing permit from the City of Edmonton. It's always best to check with the City's planning department if you're unsure.

If your sump pump discharge pipe freezes, it's crucial to disconnect the above-ground portion of the discharge hose before winter sets in to allow any residual water to drain and prevent freezing. If it does freeze, you'll need to thaw the line safely, perhaps with a hairdryer or warm water, and ensure it's clear before the next rainfall or snowmelt to prevent basement flooding.

You should test your sump pump at least annually, and it's especially critical to do so in early March before the spring snowmelt here in Edmonton. A quick 10-minute test involving pouring water into the pit and checking for discharge outside can save you from thousands of dollars in potential water damage.

Homes built before 1988 in Edmonton often relied on older weeping tile systems that are usually directly connected to sewers, while homes built after 1988 are required to have sump pump systems as part of their foundation drainage. This means newer homes generally have more active and reliable systems for managing groundwater, but both types require regular maintenance.

While some minor replacements might be DIY-friendly, installing a new sump pump system, especially if it involves digging a pit or significant plumbing and electrical work, is best left to licensed professionals in Edmonton. This ensures the installation meets code requirements, is safe, and functions effectively to protect your home from flooding.

According to the National Plumbing Code adopted in Alberta, a sump pit must be at least 750 millimeters deep and have a minimum area of 0.25 square meters. It also needs a cover that is airtight and designed to prevent children from removing it, which is important for safety.

A musty smell in the basement can sometimes be related to your sump pump system, especially if there's stagnant water in the pit or if the discharge line isn't properly directing water away from the foundation. It's a good idea to test your sump pump, check the pit for unusual odors or debris, and ensure the discharge is functioning correctly.

A backwater valve is a device installed in your plumbing system that prevents sewage from backing up into your home from the municipal sewer lines, which can happen during heavy rain or sewer surcharges.

Edmonton's harsh climate can be pretty hard on us, but your sump pump doesn’t really experience it. If you make sure your discharge line doesn’t freeze, winter won’t bother your sump pump. However, they generally work much harder through the wet seasons, so make sure to test it before the snow starts melting quickly.

If you’re even considering sump pump installation, Edmonton homeowners should call Mr. Rooter Plumbing today. An invaluable service for any property owner who would like to preserve the safety of their home, installing a sump pump is a relatively quick and painless process that will not disrupt your daily routines.

Mr. Rooter Plumbing of Edmonton has an experienced team of certified and licensed plumbers ready to take on the job. You are one call away from safeguarding your home against water damage, basement flooding, mould, and foundational issues, so why wait any longer?

Contact us now. Do you need drain cleaning or have leaking pipes? We can take care of all of your services in one visit. Don’t wait for larger problems to emerge—book a service appointment today.